Road Conditions

Sierra Road Conditions

Check Current Highway Conditions


Mobile

Sierra at Tahoe

360º Smokehouse BBQ Deck

50 at Sierra at Tahoe

50 Ski Run Tahoe

Meyers

Echo Summit

Twin Bridges

Placerville

The Northern Sierra Nevada
SR 49US 50,  I 80SR 88SR 89,  US 395

Where are chains required?

Chains are most often required in the higher mountain passes of northern California, such as Interstate 5 north of Redding, Interstate 80 over Donner Pass between Sacramento and Reno, Nevada, and US Highway 50 over Echo summit between Lake Tahoe and Sacramento. Chains are also sometimes required on State Route 58 near Tehachapi between Bakersfield and Mojave, Interstate 15 over Cajon Pass between Victorville and San Bernardino, and Interstate 5 over Tejon Pass between Los Angeles and Bakersfield. However, snow can fall unseasonably at higher elevations at many locations within California. Chains may be required at any time at these higher elevations when conditions warrant.

If I have 4-wheel-drive, do I need to carry chains?

Yes. Even though weather conditions may not warrant the use of chains on 4-wheel-drive vehicles at a particular time, to enter a chain control area, you must have a set of chains (for one drive axle) for your vehicle in your possession. If conditions worsen or you have trouble controlling your vehicle, you must stop and install the chains.

If I have snow tires, do I need to carry chains?

Yes. Even though weather conditions may not warrant the use of chains on passenger vehicles equipped with snow tires at a particular time, to enter a chain control area, you must have a set of chains (one pair) for your vehicle in your possession. If conditions worsen or you have trouble controlling your vehicle, you must stop and install the chains.

Must chains be carried in exempted vehicles?

Vehicles without chains are not permitted to enter chain control areas and must return to a lower elevation where chains are not required. There is no provision to park vehicles at chain control check points.

What are the R-1, R-2 conditions that I hear about?

Although Caltrans does not post signs with these designations nor use them to announce chain controls to the public, they are used internally within Caltrans and the CHP as a kind of shorthand to describe chain restrictions and may be included in traffic reports disseminated by various news outlets.

There are three primary categories of chain restrictions, as shown below:

R-1: Chains are required on all vehicles except passenger vehicles and light-duty trucks under 6,000 pounds gross weight and equipped with snow tires on at least two drive wheels. Chains must be carried by vehicles using snow tires. All vehicles towing trailers must have chains on one drive axle. Trailers with brakes must have chains on at least one axle.

R-2: Chains are required on all vehicles except four-wheel-drive vehicles under 6,500 pounds gross weight and equipped with snow tires on all four wheels. Chains for one set of drive wheels must be carried by four wheel-drive vehicles using snow tires.

R-3: Chains are required on all vehicles without exception.

R-1 and R-2 are the most common conditions. A highway will often be closed before an R-3 condition is imposed. Some local areas may use variations of these designations. You must follow the directions on the signs posted for chain controls or any instructions given by Caltrans or CHP personnel at chain control check points, even if these are at variance with broadcast road condition reports or information contained herein.

http://www.dot.ca.gov/hq/traffops/trucks/ops-guide/chains.html

http://www.dot.ca.gov/hq/roadinfo/us50

Sierra Ski Patrol NSP Home Page © 2020 Frontier Theme